Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 16166 | WESTERN ENTERPRISES DIV OF SCOTT AND |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | CONICAL W/OUT CONTAINER |
| STYL | STYLE DESIGNATOR | CONICAL W/OUT CONTAINER |
| AZTL | BODY OVERALL LENGTH | 0.750 INCHES NOMINAL |
| AGWL | SMALLEST OUTSIDE DIAMETER | 0.187 INCHES NOMINAL |
| ADNP | DROP PRESSURE | NOT RATED |
| CRXW | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| APGF | DESIGN TYPE | REUSABLE |
| AAZL | TAPERED HOLE MINOR DIAMETER | ANY ACCEPTABLE |
| MATT | MATERIAL | COPPER ALLOY FILTERING MEDIUM |
| AZKQ | TEMP RATING | NOT RATED |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| ADNH | FILTRATION RATING IN MICRONS | NOT RATED |
| ADMT | TAPERED HOLE MAJOR DIAMETER | 0.187 INCHES NOMINAL |
| AGWM | LARGEST OUTSIDE DIAMETER | 0.312 INCHES NOMINAL |
| ADNK | FLOW DIRECTION | INSIDE OUT |