Part Number
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code | Company |
|---|---|
| 24446 | GENERAL ELECTRIC CO |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABGS | BASE THICKNESS | 0.250 INCHES |
| ABGS | BASE THICKNESS | 0.250 INCHES |
| ABGQ | BOARD OVERALL HEIGHT | 1.125 INCHES |
| MATT | MATERIAL | PLASTIC BOARD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| ABCS | TERMINAL ROW QUANTITY | 1 |
| ABCX | BOARD CONSTRUCTION | CONSTRUCTED OF INDIVIDUAL PIECES WHICH ARE MOUNTED ON A TRACK OR CHANNEL |
| CRZR | FEEDTHRU TERMINAL QUANTITY | 14 SINGLE COMBINATION |
| CQCW | FEEDTHRU CONNECTION END TYPE | 433 15TH MATERIAL RESPONSE BOTH ENDS |
| AAMA | MOUNTING HOLE DIAMETER | 0.166 INCHES |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.250 INCHES |
| CQCW | FEEDTHRU CONNECTION END TYPE | 859 FOURTH COMBINATION BOTH ENDS |
| CWLG | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 9.250 INCHES |
| CWLN | TERMINAL DESIGN | VERTICAL FEEDTHRU |
| ABDV | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.500 INCHES |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.250 INCHES |
| AAQL | BODY STYLE | STANDOFF |
| ABGP | BOARD OVERALL WIDTH | 1.125 INCHES |
| FEAT | SPECIAL FEATURES | LOCKING CHANNEL AT EACH BINDING SCREW |
| ABGN | BOARD OVERALL LENGTH | 9.750 INCHES |
| ABCT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.625 INCHES |