Part Number
Definition:
AN AXLE HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS), PERIPHERSL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOLDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS COUPLINGS AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO TRANSMIT MOTION SEE SHAFT(1), SHOULDER. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1),STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 59958 | CLEVELAND GEAR COMPANY INC. |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 31.750 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 1.0000 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | PLAIN |
| CSPY | LARGEST STEP DIAMETER | 1.0625 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.3280 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMFZ | SECOND END DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A582 ASSN STD SINGLE MATERIAL RESPONSE |
| ATPC | STEP QUANTITY | 3 |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | AXLE |
| AGAV | END ITEM IDENTIFICATION | HOSE REEL ASSEMBLY WITH UNIVERSAL REWIND, BRAKE (REFERENCE: NL20M200B) |