Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 17446 | HUCK INTERNATIONAL INC. DBA ALCOA FA |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.959 INCHES MINIMUM AND 1.017 INCHES MAXIMUM |
| MATT | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ANEE | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASA | THREAD LENGTH | 0.725 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES OVERALL |
| AASB | FASTENER LENGTH | 1.610 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 4006 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |