Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 59165 | NORMAN FILTER COMPANY, L.L.C. |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADNQ | DIFFERENTIAL PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| APGF | DESIGN TYPE | NONREUSABLE |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ADNP | DROP PRESSURE | 5.0 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | RUBBER BUNA N SEAL |
| AGAV | END ITEM IDENTIFICATION | WEAPONS CODE FNF, SUPPORT EQUIPMENT (SE), B-2 BOMBER AIRCRAFT; NSN 4920-01-347-1666 |
| MATT | MATERIAL | GLASS FIBER FILTERING MEDIUM AND STEEL COMP 304 FILTERING MEDIUM AND PLASTIC NYLON FILTERING MEDIUM AND PLASTIC EPOXY FILTERING MEDIUM |
| ADNH | FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| AZTL | BODY OVERALL LENGTH | 7.062 INCHES NOMINAL |
| CRXW | FILTERING MEDIA DESIGN | LAYERED SINGLE FILTERING MEDIA RESPONSE |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| ADAS | BODY INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| AZKQ | TEMP RATING | -70.0 DEG FAHRENHEIT MINIMUM AND 350.0 DEG FAHRENHEIT MAXIMUM |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND WATER/ALCOHOL MIXTURE |
| ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL |