Part Number
Part Number:
NSN:
NIIN:
Item Name:
COUPLING , CLAMP , GROOVED
Definition:
A METAL LOOP HAVING EITHER A V OR U CROSS SECTION OR CHANNELLED SEGMENT(S). IT MAY BE ATTACHED TO A FLAT BAND. IT IS DESIGNED TO CREATE A FLUID TIGHT JOINT AND/OR CONNECT PIPE, TUBING, TANK COVER(S), DUCT(S) AND THE LIKE, BY MATING WITH FLANGED OR BEADED FERRULE(S), FLARED, OR BEADED ENDS. IT MAY OR MAY NOT HAVE A SEALING INNER LINER. A LATCH OR LATCHES OF THE QUICK COUPLING TYPE, NUT OR BOLT TYPE, OR THREADED TRUNNION TYPE IS (ARE) USED TO LOCK AND ADJUST THE BAND. EXCLUDES COUPLING, CLAMP, PIPE AND RING, LOCKING, METAL DRUM COVER.
CAGE Information
| Code | Company |
|---|---|
| 94581 | V I J CORPORATION DBA NUCO |
Federal Supply Class
Title
HARDWARE, WEAPON SYSTEM
Inclusions:
INCLUDES ADAPTERS; ANCHOR PLATES AND STRAPS; ANODES; BELLOWS; COUPLINGS; CONTROL RODS; ACCESS DOORS; FAIRLEADS; MOUNTS; TIE RODS; YOKES.
Exclusions:
EXCLUDES COMMERCIAL HARDWARE (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AARX | INSIDE DIAMETER | 3.748 INCHES NOMINAL |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-5059, COMP 302 RETAINER |
| ALDW | SEALING INNER LINER | NOT INCLUDED |
| PRMT | PRECIOUS MATERIAL | SILVER |
| ALEB | RETAINER WIDTH | 0.720 INCHES NOMINAL |
| ALDS | NUT TYPE | PLAIN HEXAGON |
| ADTJ | RETAINER THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| AKZZ | INCLUDED ANGLE IN DEG | 40.0 |
| ASXG | DRILLED LOCKWIRE HOLE | INCLUDED |
| HGTH | HEIGHT | 0.281 INCHES NOMINAL |
| ALEE | BAND WIDTH | 0.750 INCHES NOMINAL |
| PMLC | PRECIOUS MATERIAL AND LOCATION | NUT SILVER |
| ALEC | ROOT WIDTH | 0.212 INCHES NOMINAL |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACC10AU MANUFACTURERS SPECIFICATION |
| AGPR | LATCH STYLE | SINGLE |
| AGCS | MAXIMUM LOAD RATING | NOT RATED |
| ABJH | TEMP RATING | 450.0 DEG FAHRENHEIT |
| ANNR | SURFACE TREATMENT AND LOCATION | SILVER PLATED NUT |
| ALDT | SEGMENT QUANTITY | 3 |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-7720 NUT |
| ANNQ | MATERIAL AND LOCATION | STEEL AISI 430 TRUNNION |
| SHPE | SHAPE | ROUND |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | GROOVED RETAINER |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-18732 T BOLT |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-5059, TYPE 301 STRAP |
| ALED | BAND THICKNESS | 0.033 INCHES MINIMUM AND 0.047 INCHES MAXIMUM |
| ANNQ | MATERIAL AND LOCATION | STEEL MIL-S-5059 BUSHING |