Part Number
Part Number:
NSN:
NIIN:
Item Name:
COUPLING , CLAMP , GROOVED
Definition:
A METAL LOOP HAVING EITHER A V OR U CROSS SECTION OR CHANNELLED SEGMENT(S). IT MAY BE ATTACHED TO A FLAT BAND. IT IS DESIGNED TO CREATE A FLUID TIGHT JOINT AND/OR CONNECT PIPE, TUBING, TANK COVER(S), DUCT(S) AND THE LIKE, BY MATING WITH FLANGED OR BEADED FERRULE(S), FLARED, OR BEADED ENDS. IT MAY OR MAY NOT HAVE A SEALING INNER LINER. A LATCH OR LATCHES OF THE QUICK COUPLING TYPE, NUT OR BOLT TYPE, OR THREADED TRUNNION TYPE IS (ARE) USED TO LOCK AND ADJUST THE BAND. EXCLUDES COUPLING, CLAMP, PIPE AND RING, LOCKING, METAL DRUM COVER.
CAGE Information
| Code | Company |
|---|---|
| 94581 | V I J CORPORATION DBA NUCO |
Federal Supply Class
Title
HARDWARE, WEAPON SYSTEM
Inclusions:
INCLUDES ADAPTERS; ANCHOR PLATES AND STRAPS; ANODES; BELLOWS; COUPLINGS; CONTROL RODS; ACCESS DOORS; FAIRLEADS; MOUNTS; TIE RODS; YOKES.
Exclusions:
EXCLUDES COMMERCIAL HARDWARE (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ALDW | SEALING INNER LINER | NOT INCLUDED |
| ALDS | NUT TYPE | PLAIN HEXAGON |
| ANNQ | MATERIAL AND LOCATION | STEEL MIL-S-18732 BOLT |
| ALEC | ROOT WIDTH | 0.207 INCHES NOMINAL |
| AKZZ | INCLUDED ANGLE IN DEG | 40.0 |
| ANNQ | MATERIAL AND LOCATION | STEEL MIL-S-5059 COMP D FULL HARD BAND |
| HGTH | HEIGHT | 0.281 INCHES NOMINAL |
| ALEE | BAND WIDTH | 0.750 INCHES NOMINAL |
| ASXG | DRILLED LOCKWIRE HOLE | NOT INCLUDED |
| AARX | INSIDE DIAMETER | 6.850 INCHES NOMINAL |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACC10AU MANUFACTURERS SPECIFICATION |
| AGPR | LATCH STYLE | SINGLE |
| AGCS | MAXIMUM LOAD RATING | NOT RATED |
| ALDT | SEGMENT QUANTITY | 3 |
| SHPE | SHAPE | ROUND |
| ABJH | TEMP RATING | NOT RATED |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | GROOVED RETAINER |
| ADTJ | RETAINER THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| ANNQ | MATERIAL AND LOCATION | STEEL, CORROSION RESISTING NUT |
| ALED | BAND THICKNESS | 0.033 INCHES MINIMUM AND 0.047 INCHES MAXIMUM |
| ALEB | RETAINER WIDTH | 0.750 INCHES NOMINAL |