Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 25169 | PROJECT MANAGER AMPHIBIOUS LIGHTERS |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | ERR-070 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| THSD | THREAD SERIES DESIGNATOR | NPTF 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED RAYON CORD ERR-100 |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQBD | BURST TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | NIPPLE CADMIUM, QQ-P-416, TYPE 2, CLASS 2 |
| CQGM | MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| ADLG | FIRST END FITTING SPEC/STD DATA | MS28740-5 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | INCLUDED |
| CRSM | VACUUM IN TORR | 50.8 |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | NIPPLE STEEL |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-13444,TYPE2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND OIL RESISTANT AND FUEL RESISTANT AND OZONE RESISTANT |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, BUNA-N |
| CQJX | NOMINAL THREAD SIZE | 0.125 INCHES 2ND END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | ERR-070 |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER ERR-100 |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABKV | OUTSIDE DIAMETER | 0.421 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 2B 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 28.000 INCHES NOMINAL OVERALL |
| AHNC | CONNECTION STYLE | PLAIN 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 625.0 POUNDS PER SQUARE INCH |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |