Part Number
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
CAGE Information
| Code | Company |
|---|---|
| 0AT62 | DRESSER-RAND COMPANY DBA RECIPROCATI |
Federal Supply Class
Title
LIQUID AND GAS FLOW, LIQUID LEVE
Inclusions:
INCLUDES LIQUID LEVEL FLOAT INSTRUMENTS; REVOLUTION COUNTERS; SPEEDOMETERS; ROTATION MEASURING INSTRUMENTS AND APPARATUS; OXYGEN FLOW INDICATORS; TACHOMETERS, INCLUDING ENGINE TACHOMETERS.
Exclusions:
EXCLUDES COMBINATION INSTRUMENTS; (FSC 6695); METEOROLOGICAL INSTRUMENTS (FSC 6660); AND AUTOMATIC CONTROL VALVES (FSG 48).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEDN | TIP LENGTH | 0.730 INCHES MINIMUM FIRST END AND 0.780 INCHES MAXIMUM FIRST END |
| AEDN | TIP LENGTH | 0.730 INCHES MINIMUM FIRST END AND 0.780 INCHES MAXIMUM FIRST END |
| APTD | END TYPE | ROUND KEYED FIRST END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| CFRQ | CASING OUTSIDE DIAMETER | 0.333 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF SECOND END |
| BJPS | CASING MATERIAL | PLASTIC |
| AKMH | CORE DIAMETER | 0.130 INCHES NOMINAL |
| AEDN | TIP LENGTH | 0.370 INCHES MINIMUM SECOND END AND 0.440 INCHES MAXIMUM SECOND END |
| AJXJ | CORE MATERIAL | STEEL |
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END |
| ABHP | OVERALL LENGTH | 8.380 INCHES MINIMUM AND 8.660 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE SHAFT ROTATION DIRECTION |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| ASDB | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL SECOND END |
| AAJD | THREAD CLASS | 2B BOTH ENDS |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.101 INCHES BOTTOM HALF NOT APPLICABLE SECOND END AND 0.104 INCHES SIDE WAIST NOT APPLICABLE SECOND END |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFRP | CASING LENGTH BETWEEN FERRULES | 7.440 INCHES MINIMUM AND 7.500 INCHES MAXIMUM |
| APTD | END TYPE | SQUARE MALE SECOND END |
| CFRZ | CORE OVERALL LENGTH | 8.380 INCHES MINIMUM AND 8.660 INCHES MAXIMUM |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.153 INCHES CLEANING WIRE ANY ACCEPTABLE FIRST END |