Part Number
Part Number:
NSN:
NIIN:
Item Name:
TENSIOMETER , DIAL INDICATING
Definition:
AN INSTRUMENT DESIGNED TO MEASURE THE TENSION ON CABLE, WIRE AND THE LIKE BY MEANS OF A TENSION INDICATING MECHANISM WITH A DEVICE FOR ATTACHING THE MATERIAL TO BE MEASURED. SEE ALSO TESTER, MATERIAL STRENGTH.
CAGE Information
| Code | Company |
|---|---|
| 17885 | AVERY WEIGH-TRONIX LLC DBA DILLON DI |
Federal Supply Class
Title
PHYSICAL PROPERTIES TESTING AND
Inclusions:
INCLUDES DESTRUCTIVE AND NONDESTRUCTIVE INSPECTION EQUIPMENT SUCH AS FLUORESCENT PENETRANT INSPECTION UNITS; MAGNETIC INSPECTION UNITS; INDUSTRIAL X-RAY MACHINES; INDUSTRIAL X-RAY FILM; TENSIOMETERS; MATERIAL HARDNESS TESTERS.
Exclusions:
EXCLUDES GENERAL PURPOSE MEASURING TOOLS (FSC 5210) AND PRECISION MEASURING TOOLS AND INSPECTION GAGES (FSC 5220).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMKD | INDICATOR TYPE | DIAL |
| AXGY | MOUNTING METHOD | BRACKET |
| BGTX | TEMPERATURE COMPENSATOR | NOT INCLUDED |
| FEAT | SPECIAL FEATURES | A PRECISION DIAL INDICATOR IS MOUNTED AT THE NULL POINT OF THE DEFLECTION BEAM; THE POINTER REVOLVES 360 DEGREES CLOCKWISE UNDER COMPRESSION OR TENSION FORCES; ACCIDENTAL OVERLOADS UP TO 30 PERCENT OF CAPACITY CAN BE SAFELY SUSTAINED WITHOUT INJURY TO THE DIAL INDICATOR OR DEFLECTION BEAM; ALL CAPACITIES FEATURE A 5:1 DESIGN SAFETY FACTOR; MAY BE MOUNTED HORIZONTALLY, VERTICALLY OR FLAT; THE BAKED ENAMEL FINISH RESISTS CORROSION AND RUST; ACCURACY OF +/- ONE PERCENT OF FULL CAPACITY; DIAL DIVISION ONE LBS INCREMENTS |
| ASPX | SCALE NAME | COMPRESSION |
| BHHY | DEFLECTION ANGLE ADJUSTER | NOT INCLUDED |
| APSK | SCALE RANGE | +0.0/+100.0 POUNDS |
| AFJU | CARRYING CASE | NOT PROVIDED |
| BHHW | MATERIAL ACCOMMODATED DIAMETER | 0.250 INCHES NOMINAL |
| FTLD | FUNCTIONAL DESCRIPTION | 3LOAD IS APPLIED AGAINST A HARDENED BALL WHICH ROTATES TO MAINTAIN VERTICAL ALIGNMENT AS PRESSURE INCREASES; THE BALL IS HELD IN PLACE WITH A SPRING CLIP; THE THREADED MOUNTING HOLE IS LOCATED OPPOSITE THE LOADING BALL IN THE BOTTOM OF THE BEAM |
| APSJ | SCALE QUANTITY | 1 |