Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 59379 | ATLAS COPCO HOLYOKE INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.1600 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 6 |
| AAGZ | FIRST END STYLE | CROSS DRILLED AND EXTERNALLY THREADED |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 1.0600 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SECOND END TWO CROSS DRILLED HOLES 90 DEG APART |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 1.4800 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.7500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.840 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| AMFZ | SECOND END DIAMETER | 0.6250 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | NORTHINGTON CORP MODEL 7/7/5-3/4X5-6CYL COMPRESSOR |
| AMFR | SECOND END KEYWAY WIDTH | 0.1250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMDX | FIRST END HOLE DIAMETER | 0.1360 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.1360 INCHES NOMINAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.6600 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.2830 INCHES NOMINAL |
| AMFT | SECOND END KEYWAY DEPTH | 0.1200 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.750 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CROSS DRILLED HOLE, EXTERNALLY THREADED AND FLAT KEYWAY |