Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
CAGE Information
| Code | Company |
|---|---|
| 00328 | DESIGNATRONICS INCORPORATED DBA STER |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AJLA | TEETH QUANTITY | 100 |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.274 INCHES |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| AGJS | PITCH DIAMETER | 1.2490 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.221 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| CWFR | NOMINAL OVERALL LENGTH | 0.325 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CWNH | TOOTH FORM | STANDARD |