Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
CAGE Information
| Code | Company |
|---|---|
| 00328 | DESIGNATRONICS INCORPORATED DBA STER |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | 0.250 INCHES FIRST END |
| AGJS | PITCH DIAMETER | 2.5000 INCHES NOMINAL |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| MATT | MATERIAL | ALUMINUM OVERALL |
| CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
| ABSX | ATTACHMENT METHOD | CLAMP |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| CWTR | HUB STYLE DESIGNATOR | SPLIT FIRST END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| CWRS | BORE NOMINAL DIAMETER | 0.240 INCHES BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.527 INCHES |
| CWTX | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| AJLA | TEETH QUANTITY | 180 |
| CWNH | TOOTH FORM | STANDARD |