National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| A893PC15 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1346PC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A981PC42 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1351MS1SH2ITEM24 | 71871 | A | 5 | 2 | 5 | AX | ||
| A1062PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| 21609 | 45301 | A | 5 | 9 | 5 | AX | ||
| A982PC42 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1353MP55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A1063PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1024PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1353MPC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A1064PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1354MP55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A1354MPC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A1407MPC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A908PC15 | 71871 | A | 5 | 9 | 5 | AX | ||
| 17217 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1736MPC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A986PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1077-1PC69 | 71871 | A | 5 | 9 | 5 | AX | ||
| A909PC15 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1033PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A914PC28 | 71871 | A | 5 | 9 | 5 | AX | ||
| A989PC28 | 71871 | A | 5 | 9 | 5 | AX | ||
| A915PC28 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1036PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A836PC42 | 71871 | A | 5 | 9 | 5 | AX | ||
| A837PC42 | 71871 | A | 5 | 9 | 5 | AX | ||
| A990PC28 | 71871 | A | 5 | 9 | 5 | AX | ||
| 21609 | 71871 | A | 5 | 9 | 5 | AX | ||
| A880PC42 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1037PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A917PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A881PC42 | 71871 | A | 5 | 9 | 5 | AX | ||
| A918PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1043PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| 99121609 | 71871 | A | 3 | 2 | 5 | AX | ||
| A992PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A882PC42 | 71871 | A | 5 | 9 | 5 | AX | ||
| A923PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1990PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A-1736M | 71871 | A | D | 9 | 2 | AX | ||
| A1193PC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A924PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A883PC42 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1204PC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A890PC15 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1211PC28 | 71871 | A | 5 | 2 | 5 | AX | ||
| A925PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1059PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1161PC28 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1232PC69 | 71871 | A | 5 | 2 | 5 | AX | ||
| 99121609 | 45301 | A | 5 | 9 | 5 | ZZ | ||
| A926PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A891PC15 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1249PC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A892PC15 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1250PC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A1259PC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A1282PC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A1295PC55 | 71871 | A | 5 | 2 | 5 | AX | ||
| A1166PC55 | 71871 | A | 5 | 9 | 5 | AX | ||
| A1338PC55 | 71871 | A | 5 | 2 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 45301 | PAASCHE AIRBRUSH CODEL |
| 71871 | ALFA LAVAL INC. |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| CSPY | LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.6880 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.2190 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| ABHP | OVERALL LENGTH | 8.625 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.6880 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.438 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AMHD | SECOND END HOLE DEPTH | 0.688 INCHES NOMINAL |